Order hotline 136 0288 9892Guangzhou Jitai · HVAC Insulated Flexible Duct Manufacturer · Shipping to 176 Countries
Guangzhou Jitai 中文Get a Quote
← Back to catalog

HVAC Insulated Flexible Duct

Three R-values R4.2 / R6 / R8 · 4–12 inch · 10 m rolls · finished at the factory

Size by spec, model generated instantly

Pick a diameter and R-value and the section redraws thicker or wider, with the model generated on the spot; lead time depends on quantity.

10 m (standard)
Customized per market
Inquiry list0 items
    Clear
    Cut-away structure · vector diagram
    OD φ202ID φ152
    Model
    IFD-4.2-6"-10
    Product
    HVAC insulated flexible duct (glass wool + foil core)
    Diameter
    6 inch (φ152)
    R-value
    R4.2 (approx. 25 mm)
    Typical use
    Standard central AC supply and branch ducts
    MOQ
    1 roll for trial / LCL for full containers
    Lead time
    Quoted by actual quantity
    View structure
    Download R4.2 datasheetPDF · A4 single page

    Diagram vs. real photo

    The section above is a parametric diagram; these two are real end faces from our workshop — yellow wool thickness, foil jacket and bore all match.

    Glass wool end face, photographed
    End face close-up: glass wool + foil jacket (4 inch)
    Silver foil end face, photographed
    Silver foil end face (6/8 inch)

    Insulated vs. uninsulated

    Drag the handle left and right. On the left the bare duct sheds water; on the right the R4.2 insulation keeps the surface dry.

    Uninsulated
    Condensation on the duct wall, constant dripping Cold pipe below dew point → surface condensation → ceiling mold and higher energy use
    Jitai R4.2 insulation
    Dry surface, no condensation Closed-cell insulation + foil jacket → moisture blocked → no on-site wrapping
    ⇄
    0 timesOn-site wrapping (right-hand option)
    R4.2 / R6 / R8Three R-values available
    10 mStandard roll length, cut to drawing
    Note: this diagram is drawn in CSS. In production, replace it with two photos shot from the same angle (bare duct / insulated duct) — far more convincing.
    Foil jacket + coating
    Glass wool insulation R4.2 / R6 / R8
    Steel wire helix
    Inner foil laminate
    Air passage
    ① JacketFoil plus coating: UV and weather resistant, suitable outdoors
    ② InsulationCentrifugal glass wool in R4.2 / R6 / R8 — this is what sets insulation performance
    ③ HelixWire helix support: crush resistant, flexible, holds shape around beams
    ④ Inner coreFoil laminate: air-tight, moisture proof, in direct contact with airflow
    ⑤ Air passageSmooth bore: low friction, quiet
    ↓ Scroll down

    Specs & lead time

    Specs and lead time are quoted against actual order quantity; special diameters and lengths can be customized.

    DiameterIDR4.2 outer diameterR6.0 outer diameterR8.0 outer diameterRoll LengthLead time
    4 inchφ102φ152φ178φ20210 mQuoted by quantity
    6 inchφ152φ202φ228φ25210 mQuoted by quantity
    8 inchφ203φ253φ279φ30310 mQuoted by quantity
    10 inchφ254φ304φ330φ35410 mQuoted by quantity
    12 inchφ305φ355φ381φ40510 mQuoted by quantity

    Not sure which grade?

    Tell us the conditions; our engineers size the diameter and R-value and reply with a quote within 48 hours.